C&H Precision V4 Plate for SIG P320 X5 / Holosun EPS
Last tested:

On this page: Verdict · Our Verified Review · The Good · The Not Good · Product Description · What others think · FAQ
The verdict Good: Sits flush on a P320 X5 Legion under a Holosun EPS, with more thread than the Holosun-supplied plate that failed.
Our Verified Review
Owned and tested by our reviewer, Will
Will’s plate is the C&H Precision V4 for the K footprint (Holosun EPS / EPS Carry). It is currently mounting an EPS on his SIG Sauer P320 X5 Legion. It sits flush and has not had any issues. His verdict: Good. For the optic on it, see our Holosun EPS Enclosed Pistol Sight review.
The plate that came with the optic from Holosun did not sit correctly on the slide. It seemed to fit, but over the course of a few competitions a screw broke off and the optic started to rotate. It took a while to realize, because it stayed fairly tight, just not fully secure.
The C&H plate has stayed tight and has survived a competition since installation. There is a lot more thread for the screws to grab than on the original plate that came with the EPS. He would recommend using an aftermarket plate in general after this experience — the Holosun optic is great, but the provided plate is not.
They torqued to spec with a tiny drop of Loctite blue, and it seems to be holding fine. He has also read and heard about some quality-control issues with C&H, but after close inspection and an unrelated trip to his favorite gunsmith, this particular plate is great. No issues.
The Good ✅
- Sits Flush: Sits flush on the P320 X5 Legion slide with no fit issues.
- More Thread Than Holosun Plate: A lot more thread for the screws to grab than the plate that came with the EPS.
- Stayed Tight Through a Competition: Has survived a competition since installation and stayed tight.
- Loctite Blue to Spec: Torqued to spec with a tiny drop of Loctite blue; holding fine.
- Gunsmith-Checked: Close inspection plus an unrelated gunsmith visit; this plate is great.
The Not Good ❌
Flaws, but not deal-breakers.
- Holosun-Supplied Plate Failed: The Holosun plate seemed to fit but a screw broke off over a few competitions and the optic started to rotate.
- QC Concerns He Has Heard About: He has read and heard about some C&H QC issues; his particular plate is fine after inspection.
Product Description
Specs and maker’s details
The C&H Precision SGX-EPS V4 plate adapts a SIG P320 X-Five / M17 / M18 Romeo1Pro or DPP optic cut to a Holosun EPS, EPS Carry or SCS Carry (K footprint). C&H rates the listing 4.80 out of 5 from 5 customer reviews.
Will’s is the K-footprint plate mounting a Holosun EPS on a SIG P320 X5 Legion.
What others think
How our verdict compares with other reviews
Overall reception: Positive. C&H Precision’s SIG P320 X-Five / M17 / M18 Romeo1Pro-DPP cut to Holosun EPS plate page shows 4.80 out of 5 based on 5 customer ratings.
Where owners agree: Owners on that page agree the plate is a perfect fit and a clean way to run an EPS or EPS Carry on a DPP-cut P320. Several call out fit and service.
Where owners disagree: The quibbles are small: slight co-witness with rear irons under an EPS, and one buyer wanted a less shiny coating. Those are finish and sight-picture notes, not fit failures.
Our take: Will lands with the fans on fit. His plate sits flush, has more thread than the Holosun-supplied plate that failed on him, and has stayed tight through a competition since install.
Sources (checked Nov 9, 2026): C&H Precision SGX-EPS product page
Frequently Asked Questions
Quick answers to common questions
Is the C&H Precision V4 plate for Holosun EPS good?
Will says Good. His K-footprint plate mounts a Holosun EPS on a SIG Sauer P320 X5 Legion, sits flush and has had no issues.
Does the Holosun EPS plate that comes with the optic work on a P320 X5 Legion?
Will’s Holosun-supplied plate seemed to fit but did not sit correctly. Over a few competitions a screw broke off and the optic started to rotate.
Does the C&H plate keep the optic tight?
Yes. Will’s has stayed tight and has survived a competition since installation. He notes there is a lot more thread for the screws to grab than on the Holosun plate.
What Loctite and torque does Will use on the C&H plate?
He torqued to spec with a tiny drop of Loctite blue, and it seems to be holding fine.
Are there quality-control concerns with C&H plates?
Will has read and heard about some QC issues with C&H, but after close inspection and an unrelated trip to his favorite gunsmith, this particular plate is great with no issues.
This review comes from Will, the founder of GoodNotGood. A big thank-you to everyone who visits. GoodNotGood was built on one idea: authentic opinions from people who actually use the products they review. If you have thoughts on this review, the site, or something you’d like to see reviewed, leave a comment below. We read every one.
Welcome to GoodNotGood.
Every review on this site comes from an actual person who has owned, used, and lived with the product. No spec sheets. No press kits. No ghostwritten fluff.
We don’t pretend to be perfectly objective or subject matter experts. We don’t chase stars or clicks. We just tell you honestly what we thought — the good, the not good, and everything in between.
In the age of synthetic content, the most valuable thing we can offer is simple authenticity.
One real person. One real experience. Take it or leave it.
More information on our reviews and our review philosophy
Was this review helpful?
Thanks for the feedback!





Own this? Tell us if it's Good or Not Good for you
Tick “I own it” to vote. One vote per review, no sign-in, no personal data stored.
Votes come from readers who say they own it. They aren't verified and don't change our verdict.