Magpul PMAG 30 AR/M4 Gen M2 MOE black polymer AR-15 magazine loaded with rounds, Magpul product photo

Magpul PMAG 30 AR/M4 Gen M2 MOE

Last tested:


good icon

On this page: Verdict · Our Verified Review · The Good · The Not Good · Product Description · What others think · FAQ

The verdict Good: Classic AR mags. Simple, cheap, reliable, with no feeding issues and easy cleanout.

Our Verified Review

Owned and tested by our reviewer, Will

Will’s Magpul PMAG 30 Gen M2 MOE mags are classic AR mags: simple, cheap, reliable. They don’t over- or under-insert. He always runs them at 29 rounds, which lets you insert with a closed bolt more easily, and he believes this to be standard practice.

The M2s are cheaper, and he has them, so there’s no need to replace them. He hasn’t tried the M3s yet because he hasn’t needed to. If it ain’t broke, don’t fix it. The grip is much better than the old steel and Teflon mags. The M2s are a little bulkier, but he prefers them that way. He has had no feeding issues or wear. To carry them, see our Black Scorpion Gear AR-15 Mag Pouch and Excellent Elite Spanker 500D Tactical Triple Mag Pouch reviews.

They’ve run them wet, muddy and sandy, and eventually they malfunction, usually when the traveler gets too dirty and hangs up, and then you end up with a broken Pez dispenser. The base plate pops off easily for cleanout, and the traveler only fits in the right way, so reassembly is impossible to mess up (though someone will figure out how). Sharpie writes nicely on them, so you can label them and keep from mixing them up with your friends’ at the range or at competitions, and they hang on to blue painter’s tape well, which they use to label round counts for stages. His verdict: Good. Will runs these Magpul PMAGs in his BCM RECCE-16; see our BCM RECCE-16 KMR-A review.

The Good ✅

  • Simple, Cheap, Reliable: Classic AR mags with no feeding issues.
  • Seats Right: They don’t over- or under-insert.
  • Better Grip: Much better grip than the old steel and Teflon mags.
  • Easy Cleanout: The base plate pops off easily, and the follower only goes back in the right way.
  • Easy to Label: Sharpie writes nicely on them, and blue painter’s tape holds well.

The Not Good ❌

Flaws, but not deal-breakers.

  • Hang Up When Very Dirty: Run wet, muddy and sandy, the follower can eventually get too dirty and hang up.
  • A Little Bulkier: The M2s are a little bulkier, though Will prefers them that way.

Product Description

Specs and maker’s details

The Magpul PMAG 30 AR/M4 Gen M2 MOE is a 30-round polymer AR-15/M4 magazine for 5.56×45 NATO/.223 Remington with an anti-tilt follower, a stainless steel spring, a ribbed gripping surface, a flared, removable floorplate and paint-pen ID panels. Magpul lists it at 5 ounces and says it’s made in the USA.

Will runs his at 29 rounds.

What others think

How our verdict compares with other reviews

Overall reception: Positive. Most coverage compares the M2 with the newer Gen M3, and Pew Pew Tactical calls the Gen 2 PMAGs still a fantastic option.

Where owners agree: Reviewers agree the M2 is a cheaper option for quality mags, and that it fits AR lowers where the M3’s bigger lip can be a problem, including some premium and billet lowers.

Where owners disagree: Pew Pew Tactical prefers the M3 for reloads, citing its heavier texture and over-insertion lip, and notes that the rear of the M2 is smoother.

Our take: Will lands with the M2 fans. His have had no feeding issues, the grip beats the old steel mags, and he hasn’t needed to try the M3s. Very dirty mags can eventually hang up, but the base plate pops off for easy cleaning.

Sources (checked Oct 22, 2026): Magpul product page · Pew Pew Tactical M2 vs M3 comparison

Frequently Asked Questions

Quick answers to common questions
Is the Magpul PMAG 30 Gen M2 MOE good?

Will says Good. They’re classic AR mags: simple, cheap, reliable, and they don’t over- or under-insert.

Why load a PMAG with 29 rounds?

Will always runs them at 29 rounds, which makes it easier to insert a mag with a closed bolt. He believes this is standard practice.

Do PMAG Gen M2s malfunction when dirty?

Will has run them wet, muddy and sandy, and eventually they malfunction, usually when the follower gets too dirty and hangs up. The base plate pops off easily for cleaning, and the follower only fits in the right way, so reassembly is hard to mess up.

Gen M2 or Gen M3?

Will hasn’t tried the M3s because he hasn’t needed to. The M2s are cheaper, he has them, and there’s no need to replace them. If it ain’t broke, don’t fix it.

How is the grip on the PMAG Gen M2?

Much better than the old steel and Teflon mags, Will says. The M2s are a little bulkier, but he prefers them that way.

This review comes from Will, the founder of GoodNotGood. A big thank-you to everyone who visits. GoodNotGood was built on one idea: authentic opinions from people who actually use the products they review. If you have thoughts on this review, the site, or something you’d like to see reviewed, leave a comment below. We read every one.

Welcome to GoodNotGood.

Every review on this site comes from an actual person who has owned, used, and lived with the product. No spec sheets. No press kits. No ghostwritten fluff.

We don’t pretend to be perfectly objective or subject matter experts. We don’t chase stars or clicks. We just tell you honestly what we thought — the good, the not good, and everything in between.

In the age of synthetic content, the most valuable thing we can offer is simple authenticity.

One real person. One real experience. Take it or leave it.

More information on our reviews and our review philosophy

More from Will

Own this? Tell us if it's Good or Not Good for you

Tick “I own it” to vote. One vote per review, no sign-in, no personal data stored.

Want to say why? Leave a comment

Comments are approved by hand before they appear.

Your email address will not be published. Required fields are marked *

Related Post